Why choose the Nissan Consult 3 Plus

 

what Nissan Consult 3 Plus?

Nissan Consult III Plus is a diagnostic software special for Nissan,support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions.It can support all Nissan car,Infiniti carand Nissan GTR.

Nissan Consult 3 Plus Functions List:

Supports ECM reprogramming on most 1999 model year and later and some TCM and ABS/VDC reprogramming.

Supports blank ECM and TCM programming.

Supports ECM reprogramming on most 1999 model year and later and some TCM and ABS/VDC reprogramming.

Supports blank ECM and TCM programming. September 2013 Nissan and Infiniti began the phase-in of “blank” service part ECMs and TCMs. Depending on the model and model year, replacement modules come WITHOUT software. When the replacement module is installed in an applicable vehicle for any reason, it will need to be programmed.

Model Year Coverage: The Nissan Diagnostic Tools Consult-III Plus is required for all 2013 and newer Nissan and Infiniti vehicles. In addition, the Consult-III Plus is required for all: 2011 and newer Nissan LEAF, Quest, and Murano CrossCabriolet vehicles; 2012 and newer Nissan GT-R and NV vehicles; and 2012 and newer Infiniti M and M Hybrid vehicles. The Consult-III Plus software is continuously being updated to accommodate new vehicles as well as older model years dating back as far as 1996.

 Top 5 Reasons to Get Nissan Consult 3 Plus:

1.Consult-3 plus = Consult-3 for Nissan + Consult-2 for Nissan
2.Software Version: CSP Software Version : CSP V41.10; Programming Data Version : plus_V75
3.Supports all the models of the Nissan and Infiniti from 1996 to 2018, with all Consult II & III functions .
4.Calcaulate the password for the new cars till year 2018 with NISSAN Password.
5.Supports ECU Programming without card
6.Can be installed on Windows XP, WIN7

 Nissan Consult3 Plus v75.20 software installation:

1.Uninstall the firewall, antivirus software.
2.Install the Consult 3 plus V75.20 to the C drive in the “NTFS” format.
3.Nissan Consult 3 Plus V65.12 & up adds ECU programming function without working with immobiliser card.
Operating system: Windows XP and Windows 7/8/10 operating system. Cannot work on VISTA O/S. ( Windows XP SP3,Windows 7 Pro/Ultimate  is also supported)

Consult -3 Plus for Nissan Functions :

Consult-3 Plus for Nissan can support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions .
And Consult III Plus can calcaulate the new 20 digital password for the Nissan new cars.

1. Consult-3 Plus for Nissan (Nissan Consult 3+) work for all nissan car , infiniti car and nissan gtr car to 2018.
2. Consult-3 Plus for Nissan work with obd-16 connector for the new kind of car, work with 14 pin connector for the old kind of car.
3. Consult-3 Plus for Nissan support nissan car electrolic system diagnostic function.

4. Consult-3 Plus for Nissansupport nissan electromobiles such as Leaf.

 Conslu-3 for Nissan Car List:
1. Scantool Diagnostics: for all Nissan,Infiniti,GTR;
2. Immobi and Smart key: for all Nissan,Infiniti,GTR;
3. Nissan GTR: for Nissan GTR Diagbostics,Immobi;
4. Electromobiles car: for Nissan Electromobiles car Diagbostics and Immobi; For immobilizer key programming function, you need to purchase Nissan Conslut-3 Plus Security card together.

Consult-3 for Nissan Packing List:
1pc* Consult 3 Plus for Nissan Vehicle Communication Module + OBD16 Cable
1pc* 14Pin Line for Nissan
1pc* USB 2.0 Cable
1pc* Casebox
1pc* HDD 160G (option)

Nissan Consult 3 Plus

For more information please visit https://www.cnautotool.com/category-179-b0-Nissan+Diagnostic+Tools.html

评论

发表评论

此博客中的热门博文

How to Read and Write Simos 18 ECU with KT200?

图片
  KT200 ecu programmer is the least expensive flasher to read Simos 18 ECU.   How to Read Simos 18 ECU with KT200? Below is the procedure to read the password (Step 1) and to set the control unit in the boot to read and write the file (step 2).   Step 1: Password search Kit to use: – Multifunction cable – Bench box – 2 resistances of 1000 Ω   Connect with the multifunction cable the following pinout and the connections on the pcb. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Password → PASSWORD SIMOS 18 BENCH BOX → Click on “Find Password” Kt200 Simos 18 Pinout 1 KT200 pinout Simos 18 RED: + 12V 6, 50, 86 BLACK: GROUND 1 BLUE: CAN-H 79 ORANGE: CAN-L 80 WHITE 71 BROWN 66 Kt200 Simos 18 Pinout 2 Now that the password has been found it’s possible to read and write the control unit. See next step.   Step 2: Read and Write ECU Connect with the multifunction cable the pinout. (Attention: Now remove the bench box) Do the connection shown below. Use the driver: → TOOLS BOOT MODE → INF
阅读全文

The Nexiq USB Link 2 Diagnostic Tools for Trucks

图片
  The Nexiq USB Link 2 is a hardware device that enables service bay personal computer to retrieve vehicle information using either wireless Bluetooth technology or more traditional cable connection. Once configured, the USB Link 2 interfaces with your PC, enabling you to use specific PC applications to perform vehicle diagnostics. Dependable and rugged, the new USB-Link 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels. The Nexiq USB Link 2 also includes a new Bluetooth* module with an enhanced data rate to support wireless communication (500 b/s J1939). For even more reliability, we’ve upgraded the USB connector to a more robust, automotive grade connector with a latching mechanism. The USB-Link 2 is compatible with a wide range of OEM software applications. The Nexiq USB Link 2 comes with the following: Latching USB Cable (Part # 404032) 9 pin
阅读全文

MSULTRA MAXISYS ULTRA TABLET

图片
  The MaxiSYS Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence. Autel Maxisys Ultra features a 13-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory, all powering the new split-screen multi-application navigation to provide diagnostic guidance and test components to confirm repairs. Combined with the dynamic topology module mapping, enhanced Auto SCAN features and Intelligent Diagnostics options, the Ultra offers the technicians step-by-step repair guidance. The new MaxiFlash VCMI functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. The convenient docking station featured ensures you always have the power to scan. MaxiSYS Ultra Features · Large 12.9’’ Touchscreen (2732 x 2048) · Android 7.0 · 2.3GHz + 1.7GHz Octa-core Processor / 256GB Memory · Advanced VCMI 5-In-1 Device: VCI, Oscilloscope,
阅读全文