X431 PRO MINI is a stylish Android-based vehicle trouble diagnostic tool

 

Launch X-431 PRO MINI Description:
X431 PRO MINI is a stylish Android-based vehicle trouble diagnostic tool. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.

 

Through the simple Bluetooth communication between the VCI module and X-431 PRO MINI, it achieves full car model and full system vehicle trouble diagnosis, which includes Reading DTCs, Clearing DTCs, Reading Data Stream,Actuation Test and Special Functions.

Moreover, it supports Wi-Fi connection, which enables you surf the Internet,update the diagnostic software online and perform remote diagnosis etc, getting your job fixed faster and easier.

 

Language:
English, French, Spanish, German, Russian, Japanese, Portuguese, Korean, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional,

Launch X431 diagnostic tool Launch X431 Pro offers a wide range of advanced features. It pretty much covers all the major systems, making it a complete solution to ensure your vehicle stays fit and running.

With Launch X431 V, you can perform advanced tasks such as ECU coding, SAS, DPF, key programming, TPMS, and ABS bleeding.

Full System Diagnosis And 30+ Reset/Service Functions

Injector Coding: This feature allows you to program the ECU to have injection control.

DPF: It allows you to check for issues (soot, smoke) in the diesel particulate filter.

EPB: The system ensures your vehicle remains steady on grades and flat terrains. It’s a system essential for your vehicle’s safety, and Launch X431 V can help you keep it checked.

Throttle Position: You can adjust the throttle position with this beauty. It will come in handy after you replace the ECU, place a new accelerator pedal, install a battery, etc.

Oil Reset: It can read oil reset light to ensure you know when it is time for a replacement.

ABS Bleeding: You will need this feature if air gets inside. This is a regular occurrence as every time the system is opened to replace components like wheel cylinders, brake lines, calipers, the air may find its way inside.

This feature lets you release air that’s trapped inside. It’s a necessary step because it can intervene with the system.

SAS: It lets you adjust the steering angle sensor. This is an important feature as issues with the SAS can lead to significant damages.

IMMO (Key Programming): With this feature, you can prevent your car from being hotwired.

TPMS/TPS: This tablet scanner can diagnose tires and see that they have the right amount of pressure. You can also reset the tire pressure system using this tool.
Check Price at Amazon

Battery Register/Maintain: The scanner allows you to reset and match a new battery. The function is relatively easy and requires no complex knowledge.

ECU Coding: It allows you to alter configurations when you replace the ECU.

X-431 PRO MINI whole set: X-431 PRO MINI is mainly composed of an X-431 PRO MINI handset, and a DBSCar II VCI module.

Launch x431 pro mini Diagnostic Tool
1 VCI module
2 Reset hole
3 Rear camera
4 Camera flash
5 Slot for VCI module For housing the VCI module.
6 POWER/Screen lock key In Off mode, press it to turn X-431 PRO MINI on; In On mode, turn X-431 PRO MINI off with long press or lock screen with short press.
7 Carry strap
8 Air intake vent
9 USB/Charging port To connect to the power adaptor for charging.
10 Microphone
11 LCD screen
12 VOLUME +/- Key  To adjust the volume. To print the screen, hold and press the POWER and VOLUME – key until a snapshot pops up on the screen.
The captured snapshot is saved in the “Screenshots” folder.
13 Speaker
14 Front camera
15 Earphone Jack

X-431 PRO MINI Technical Parameters:
Operating system: Android 5.1
Processor :Quad core 1.3 GHz
Memory: 2GB
Storage:16GB
LCD screen: 6.9 inch with a resolution of 1280 x 720 pixels
Camera :Front-facing 2MP camera + rear-facing 5MP camera
Battery :3.7V/3000mh rechargeable polymer lithium battery
Connectivity : Wi-Fi: WLAN 802.11b/g/n ，Bluetooth: Bluetooth 4.1
Working temperature: 0℃ ~ 45℃
Storage temperature: -10℃ ~ 50℃

VCI module:
Working voltage 9 ~18V
Average working current About 85mA
Standby current About 55mA
Working temperature -10℃ ~ 55℃
Storage temperature -20℃ ~ 70℃
Relative humidity 20% ~ 90%

DBScarIII adapter parameters:
The brand-new DBScarIII adapter is small size and can be easily plugged into the handset to diagnose and matching, it tests car models stably, it supports
CAN diagnosis also USB data transfer.
Size: 69 × 40 × 18 mm
Operating voltage: 9V DC – 18V DC
Test voltage: DC12V
Typical power consumption: ≤2W
Bluetooth distance: 100 m
Connectivity: Bluetooth + wired
Operating temperature: -10℃to 50℃
Red Indicator: Turns red when connected to power supply;
blue Indicator: Turns blue then wireless Bluetooth work;
USB work: Turns green when the connector is connected to the USB cable

Launch X431 Pro MINI Obd2 Scan Tool Package Includes:
1pc x X-431 PRO MINI tablet
1pc x Password envelope
1pc x VCI module (For connecting OBD II vehicles)
1pc x OBD II extension cable
1pc x OBD I adaptor (For connecting the non-16pin diagnostic connector and the
VCI module)
1pc x Battery clamps cable
1pc x Power adaptors
1pc x Non-16pin connectors (For connecting non-OBD II vehicle)

FAQs

1. Can I store data on Launch X431 Pro?

Yes. It comes with a 128GB TF card, which you can use to store pictures, DTCs, reports, etc.

2. Is it durable?

Launch X431 Pro comes enclosed in an anti-slip and anti-grease protective sleeve, which is drop tested. Hence, it is very durable.

3. Can I use this in an older car? Do I have to pay extra?

You can use it in older cars, and you don’t have to pay extra because it comes with an OBD1 adapter. However, it may not support all older cars.

4. Will the scanner still work after two years if not updated since the updates are only for two years?

Yes, it will. However, you may not be able to enjoy the latest features.