Fiat Marelli IMMO Not Precode by OBDSTAR X300 DP Plus

 OBDSTAR X300 DP Plus X300 PAD2 is a new Android-based vehicle trouble diagnostic device developed for internet applications.

13-1 13-2 OBDSTAR-X300-DP-PLUS-PAD2-1 OBDSTAR-X300-DP-PLUS-PAD2-2 OBDSTAR-X300-DP-PLUS-PAD2-3
Here comes with customer feedback: OBDSTAR x300 dp plus is ok with Delphi FIAT, but for Marelli doesn’t cover all software version. It reads EEPROM ok, but after that said EEPROM verification error. Done with other programmer (zed full).

Check the OBDSTAR Scanner Fiat Marelli key precoding tips below:

It works absolutely fine. Obdstar is flawless with fiat. User error due to bad keys we expect.

You must use the correct remote or the buttons will do different things.

There are Delphi remotes and Marelli remotes.
Both are available aftermarket.
You must use the correct remote or the buttons will do different things.

If no buttons work then the key is 100% faulty.

obdstar x300 dp plus full it works very well on psa Renault vag fiat. It’s the cheapest on market. obdstar it works for me everytime aftermarket or original remote.

Chinese remotes/keys have a lot of problems with the Mareli Fiat. Doesn’t work with Keydiy or Xhorse keys either.

Best is to buy 2nd hand original, change PCF and enjoy fully working key without any issues.

Or use silca key. always silca key works really good quality. Slice key is 2/3 times price but works.

So use original/slica keys for Fiat Marelli type and chinese key for delphi.

OBDSTAR Fiat pre-coding and key programming list:

Pre-Coding

DELPHI 70F3237+93C86(ID46)

DELPHI 70F3379+93C86(ID46)

DELPHI 70F3632/70F3633(ID46)

DELPHI 93C66(B)(ID48)

MARELLI 70F3237+95160(ID48)

MARELLI 70F3378+95160(ID46)

MARELLI 70F3633+95320(ID46)

MARELLI 70F3238+95320(ID48)

MARELLI MB91465P+95640(ID46)

MARELLI 9S12DG128 3K91D(ID48)

MARELLI 9S12DG256 1K79X(ID48)

MARELLI 9S12DG256 1K79X(ID46)

SIEMENS/CONTINENTAL 9S12DG128(ID46)

Program keys

124 SPYDER

2017-

500

500L

500X PROX

ALBEA

ALFA 147

ALFA GT

BIPPER

BOXER

2012-

2007-2012

BRAVO

DAILY

2012-

2007-2012

DOBLO

NEW DOBLO

DUCATO

2012-

2007-2012

FIORINO

FREEMONT

GRANDE PUNTO

GUILIETTA

IDEA

JUMPER

2012-

2007-2012

LINEA

MAREA

MITO

NEMO

PALIO

PALIO RST

PANDA

PROMASTER CITY

PROMASTER VAN

PUNTO

1999-2005

SCUDO

STILO

评论

发表评论

此博客中的热门博文

How to Read and Write Simos 18 ECU with KT200?

图片
  KT200 ecu programmer is the least expensive flasher to read Simos 18 ECU.   How to Read Simos 18 ECU with KT200? Below is the procedure to read the password (Step 1) and to set the control unit in the boot to read and write the file (step 2).   Step 1: Password search Kit to use: – Multifunction cable – Bench box – 2 resistances of 1000 Ω   Connect with the multifunction cable the following pinout and the connections on the pcb. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Password → PASSWORD SIMOS 18 BENCH BOX → Click on “Find Password” Kt200 Simos 18 Pinout 1 KT200 pinout Simos 18 RED: + 12V 6, 50, 86 BLACK: GROUND 1 BLUE: CAN-H 79 ORANGE: CAN-L 80 WHITE 71 BROWN 66 Kt200 Simos 18 Pinout 2 Now that the password has been found it’s possible to read and write the control unit. See next step.   Step 2: Read and Write ECU Connect with the multifunction cable the pinout. (Attention: Now remove the bench box) Do the connection shown below. Use the driver: → TOOLS BOOT MODE → INF
阅读全文

The Nexiq USB Link 2 Diagnostic Tools for Trucks

图片
  The Nexiq USB Link 2 is a hardware device that enables service bay personal computer to retrieve vehicle information using either wireless Bluetooth technology or more traditional cable connection. Once configured, the USB Link 2 interfaces with your PC, enabling you to use specific PC applications to perform vehicle diagnostics. Dependable and rugged, the new USB-Link 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels. The Nexiq USB Link 2 also includes a new Bluetooth* module with an enhanced data rate to support wireless communication (500 b/s J1939). For even more reliability, we’ve upgraded the USB connector to a more robust, automotive grade connector with a latching mechanism. The USB-Link 2 is compatible with a wide range of OEM software applications. The Nexiq USB Link 2 comes with the following: Latching USB Cable (Part # 404032) 9 pin
阅读全文

MSULTRA MAXISYS ULTRA TABLET

图片
  The MaxiSYS Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence. Autel Maxisys Ultra features a 13-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory, all powering the new split-screen multi-application navigation to provide diagnostic guidance and test components to confirm repairs. Combined with the dynamic topology module mapping, enhanced Auto SCAN features and Intelligent Diagnostics options, the Ultra offers the technicians step-by-step repair guidance. The new MaxiFlash VCMI functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. The convenient docking station featured ensures you always have the power to scan. MaxiSYS Ultra Features · Large 12.9’’ Touchscreen (2732 x 2048) · Android 7.0 · 2.3GHz + 1.7GHz Octa-core Processor / 256GB Memory · Advanced VCMI 5-In-1 Device: VCI, Oscilloscope,
阅读全文